Pellet-cladding interaction on light water reactor fuel. (II) BWR type fuel rod.

Comparison of Pellet-Cladding Mechanical Interaction for Zircaloy and Silicon Carbide Clad Fuel Rods in Pressurized Water Reactors

Contact between the outer surface of a fuel pellet and the inner surface of the fuel rod cladding can result in several kinds of undesirable behavior. As the pellet swells outward and the cladding creeps down, large stresses are generated in both the pellet and the cladding. This contact may exacerbate chemical degradation of the cladding and the stress may enable rapid propagation of cracks. B...

Evaluation of Missing Pellet Surface Geometry on Cladding Stress Distribution and Magnitude

Missing pellet surface (MPS) defects are local geometric defects in nuclear fuel pellets that result from pellet mishandling or manufacturing. The presence of MPS defects can cause clad stress concentrations that are substantial enough to produce through-wall cladding failure for certain combinations of fuel burnup, and reactor power level or power change. Consequently, the impact of potential ...

Behaviors of Nuclear Fuel Cladding During RIA

Fuel Pellet Production from Reed Canary Grass

This thesis focuses on two main areas: methods for assessing regional supply potentials of reed canary grass (Phalaris arundinacea L.) (RCG); and process technology for the production of high-quality RCG pellets. Partial equilibrium modelling, incorporating a break-even price approach, was used to examine supply potentials for RCG in Västerbotten County, northern Sweden. A remote sensing method...

Determination ofresearch reactor fuel burnup