Perforation of aluminium alloy-CFRP bilayer plates under quasi-static and impact loading
نویسندگان
چکیده
منابع مشابه
Strength Prediction in CFRP Woven Laminate Bolted Double-Lap Joints under Quasi-static Loading using XFEM
The current paper is concerned with modelling damage and fracture in woven fabric composite double-lap bolted joints that fail by net-tension. A 3-D finite element model is used, which incorporates bolt clamp-up, to model a range of CFRP bolted joints, which were also tested experimentally. The effects of laminate lay-up, joint geometry, hole size and bolt clamp-up torque were considered. An Ex...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Single-Lap Joints under Quasi-static Loading using XFEM
This paper is concerned with modelling damage and fracture in woven fabric CFRP single-lap bolted joints that fail by net-tension. The approach is based on the assumption that damage (matrix cracking, delamination and fibre tow fracture) initiates and propagates from the hole in a self-similar fashion. A traction-separation law (based on physically meaningful material parameters) is implemented...
متن کاملFailure of Fibrous Composite Plates under Static Biaxial Planar Loading
This paper outlines an experimental investigation carried out for the analysis of failure mechanisms in fibrous laminated composite plates containing stress raisers, in the form of cutouts, under static biaxial planar compressive loadiing. A specially designed biaxial loadiing frame was used to test a series of 48 ply graphite/epoxy composite laminated plates with centrally located circular hol...
متن کاملOptimization of infinite composite plates with quasi-triangular holes under in-plane loading
This study used particle swarm optimization (PSO) to determine the optimal values of effective design variables acting on the stress distribution around a quasi-triangular hole in an infinite orthotropic plate. These parameters were load angle, hole orientation, bluntness, fiber angle, and material properties, which were ascertained on the basis of an analytical method used by Lekhnitskii [3]. ...
متن کاملInvestigation of Repeated Low Velocity Impact Behaviour of GFRP /Aluminium and CFRP /Aluminium Laminates
The objective of this research was to investigate esponse of repeated low velocity impact tests on glass fibre/ epoxy-Al metal laminates (GEAML) and carbon fibre/ epoxy-Al metal laminates (CEAML) at the same location using drop-weight tester. CEAML, GEAML as well as monolithic Al panels of the same thickness were impacted repeatedly up to four impacts. The effect of repeated impacts on specimen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Impact Engineering
سال: 2018
ISSN: 0734-743X
DOI: 10.1016/j.ijimpeng.2018.06.011