Performance Analysis of PSO DFFP Based DC-DC Converter with Non Isolated CI using PV Panel

نویسندگان

چکیده

This article presents the modeling and development of a DC-DC converter with Partial Swarm Optimization Distinctive Feed Forward Propagation (PSO-DFFP) controller for hybrid power systems, including photovoltaic panels. The transient dynamic analysis proposed has been presented. PSO-DFFP designed to improve operating efficiency reduces input current ripple. ANFIS PSO DFFP controllers are developed, performance system is compared. switching losses voltage drops in modes. demonstrated developed 200W, 100kHz model. From experimental results, it can be exposed that acceptable PV applications.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Isolated Quasi-Switched-Capacitor DC/DC Converter using solar PV

This paper proposed to utilize the DC source from the solar PV. The DC/DC converter is the unidirectional power flow between the solar PV and load, while in existing its bidirectional. The proposed converter becomes compact using wide band gap devices which provide high efficiency and reduces heat generation of the circuit. PSO is used for the switching control for the converter. The converter ...

متن کامل

Analysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter

In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...

متن کامل

A Non Isolated Bidirectional Dc-dc Converter with Soft Switching

Power electronic converter systems for applications such as telecom, automotive, and space can have dc voltage buses that are backed up with batteries or super-capacitors. These batteries or super-capacitors are connected to the buses with bidirectional dc–dc converters which allow them to discharged or charged, depending on the operating conditions. Bidirectional dc–dc converters may be isolat...

متن کامل

A modified high step-up non-isolated DC-DC converter for PV application

A non-isolated high voltage gain DC-DC converter has been presented in this paper. The boost, SEPIC and modified SEPIC converters were nalyzed and their performance was compared with the proposed converter. The proposed converter has been designed for the input voltage of 5 V and an output voltage of 150 V with 100 W output power. The efficiency of the converter obtained was 92.5%, which is hig...

متن کامل

Dc-Dc Converters Based On 3SSC and VMC Using High Voltage Gain Non-Isolated Converter

Now-a-days the new family of dc-dc converters based on three state switching cell and voltage multiplier cells. It present a demonstrate of some advantages and limitations of a several topologies were typically use in voltage step-up applications. The operating principle of this family has chosen the boost converter and discussed in detail. The analysis of converter can applicable in uninterrup...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Robotics and Control Systems

سال: 2022

ISSN: ['2775-2658']

DOI: https://doi.org/10.31763/ijrcs.v2i2.628