Performance analysis of wells turbine blades using the entropy generation minimization method
نویسندگان
چکیده
منابع مشابه
Design and Analysis of 3D Blades for Wells Turbine
Wells turbine is a self-rectifying air turbine which is widely used in oscillating water column energy converter. The Wells turbine will always rotate in the same direction irrespective of the direction of the oscillating airflow. Furthermore the Wells turbine has a simple configuration and structure. This is why the Wells turbine is very commonly used for conversion of wave energy. At present ...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Optimization of Double Pipe Fin-pin Heat Exchanger Using Entropy Generation Minimization
In the current work optimization of double pipe fin-pin heat exchanger has been studied. The effective parameters those are controlling the heat exchanger performance are divided in two categories; geometrical and operating conditions. Using the Brent’s optimization algorithm and handling the thermodynamically design concept, one can minimize entropy generation in different length of heat excha...
متن کاملThe Material Selection for Typical Wind Turbine Blades Using a Madm Approach& Analysis of Blades
Over the centuries, energy has been supplied by wood, coke, coal, oil and natural gas, as well as by uranium (nuclear energy). All these energy sources are limited and at the same time these energy sources create pollution problems. This has led to the focus on a sustainable energy supply, which implies optimized use of energy, minimized pollution. That is why wind energy is prominent and it is...
متن کاملEvaluation of Turbine Blades Using Computed Tomography
Turbine blades are high value castings having complex internal geometry. Computed Tomography has been employed on Turbine blades for finding out defects and internal details. The wall thickness, rib thickness and radius of curvature are measured from the CT slices. The discontinuities including blockages of cooling passages in the cast material can be detected. 3D visualization of the turbine b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Renewable Energy
سال: 2016
ISSN: 0960-1481
DOI: 10.1016/j.renene.2015.09.045