Performance and Retrofitting of Unreinforced Masonry Buildings against Natural Disasters – A Review Study
نویسندگان
چکیده
منابع مشابه
Investigating Efficiency of Shotcrete for Retrofitting Masonry Buildings
One of a feasible and efficient method to retrofit structures is spraying shotcrete which is widely applied around the world. Shotcrete is concrete with fine aggregates which are sprayed through a hose and by air pressure coat at high velocity onto a surface. In the current research, three masonry schools from different regions of Iran are selected. The retrofitted wall surfaces have been prepa...
متن کاملFlexural Tension in Unreinforced Masonry
Unreinforced masonry is that in which the tensile strength of the masonry is taken into consideration in design. Allowable out-of-plane tensile stress values are a function of the mortar type, such as Portland cement/lime mortar vs. masonry cement mortar or type M or S mortar vs. type N mortar. The allowable tensile stress is also a function of the masonry construction, such as tension parallel...
متن کاملEffective stiffness of unreinforced brick masonry walls
Code design of Unreinforced Masonry (URM) buildings is based on elastic analysis, which requires as input parameter the effective stiffness of URM walls. Current approaches estimate the effective stiffness as fixed ratio of the gross sectional stiffness but comparisons with experimental results have shown that this does not yield satisfactory predictions. In this paper, a recently developed ana...
متن کاملTesting unreinforced masonry structures at reduced scale
When testing multi-story structures on a shaking table, most testing facilities require a reduced scale model. Producing scale test units at small scale is particularly challenging for unreinforced masonry structures. Previous work by other researchers showed that scaling of units and mortar joints is mandatory in order to obtain for the reduced scale masonry failure modes, which are similar to...
متن کاملSeismic Design of Box-Type Unreinforced Masonry Buildings Through Direct Displacement-Based Approach
In the last decade, displacement-based seismic design procedures have been recognised to be effective alternatives to force-based design (FBD) methods. Indeed, displacement based design (DBD) may allow the structural engineer to get more realistic predictions of local and global deformations of the structure, and hence damage, under design earthquakes. This facilitates the achievement of perfor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineer: Journal of the Institution of Engineers, Sri Lanka
سال: 2014
ISSN: 2550-3219,1800-1122
DOI: 10.4038/engineer.v47i3.6896