Performance evaluation of material separation in a material recovery facility using a network flow model
نویسندگان
چکیده
منابع مشابه
Material Flow in Rotary Drums
The experimental investigation of material flow in rotary drums is studied. An equipment in the size of pilot-scale was used to collect experimental data for investigation of validity of the conventional steady-state model of material flow in rotary drums. Also, the transient data of the time required for material movement in the empty drum up to any specified cross section are also reported. T...
متن کاملA high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material
In this paper we report on a lithium ion battery (LIB) based on improved olivine lithium iron phosphate/carbon (LiFePO4/C) as cathode material and LiNa0.02K0.01FePO4/C synthesized by sol-gel method and TiO2 nanotube arrays (TNAs) with an anatase phasesynthesized through anodization of Ti foil as an anode electrode. Crystallographic structure and surface morphology of the cathode and anode mate...
متن کاملEvaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks
In this research work, the effects of flotation parameters on coking coal flotation combustible material recovery (CMR) were studied by the artificial neural networks (ANNs) method. The input parameters of the network were the pulp solid weight content, pH, collector dosage, frother dosage, conditioning time, flotation retention time, feed ash content, and rotor rotation speed. In order to sele...
متن کاملA 3D Numerical Model to Investigate Mechanical, Thermal and Material Flow Characteristics in Friction Stir Welding of Copper Sheets
The objective of this study was to develop a numerical model for the prediction of temperature distribution, effective plastic strain distribution, and especially material flow in friction stir welding of copper plates. The DEFORM-3D software was used by incorporating a lagrangian incremental formulation. Threedimensional results of the material flow pattern which were extracted using the po...
متن کاملNumerical investigation of heat transfer in a sintered porous fin in a channel flow with the aim of material determination
Extended surfaces are one of the most important approaches to increase the heat transfer rate. According to the Fourier law, the heat transfer increases by increasing the contact surface of body and fluid. In this study, the effect of heat transfer has been investigated on two sets of engineered porous fins, in which the balls with different materials are sintered together. The fluid flow throu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Resources, Conservation and Recycling
سال: 2018
ISSN: 0921-3449
DOI: 10.1016/j.resconrec.2017.11.021