Performance Evaluation of Titanium Dioxide (TiO2) Nano Cutting Fluids in CNC Turning of Aluminium Alloy (AL319) via Minimum Quantity Lubricant (MQL) Technique
نویسندگان
چکیده
منابع مشابه
Analysis of Minimum Quantity Lubrication (MQL) for Different Coating Tools during Turning of TC11 Titanium Alloy
The tool coating and cooling strategy are two key factors when machining difficult-to-cut materials such as titanium alloy. In this paper, diamond coating was deposited on a commercial carbide insert as an attempt to increase the machinability of TC11 alloy during the turning process. An uncoated carbide insert and a commercial Al₂O₃/TiAlN-coated tool were also tested as a comparison. Furthermo...
متن کاملPerformance Evaluation of Nano Graphite Inclusions in Cutting Fluids with Mql Technique in Turning of Aisi 1040 Steel
Liberation of heat and generation of friction associated with any machining operation ever pose a problem which not only reduce the tool life but also impair quality of the product. Cutting fluids have been the conventional choice to curtail friction and temperatures in machining because of its lubrication and cooling actions. However, considering health hazards posed by the conventional cuttin...
متن کاملCharacterization of Cutting Parameters in the Minimum Quantity Lubricant (MQL) Machining Process of a Gearbox
This paper aims to find the key process parameters for machining different parts of an automobile gearbox, commissioned by a company that needs to replace with the MQL lubrication system their current machining process based on cutting fluids. It particularly focuses on the definition of appropriate cutting parameters for machining under the MQL condition through a statistical method of Design ...
متن کاملCutting Parameters in the Minimum Quantity Lubricant (mql) Machining Process of a Gearbox
Today one of the top priorities in the machining industry is to increase or retain the profit margin through cost reduction. In addition, consumers are becoming increasingly aware of the impact that the life cycle of products has on the environment, at the time of their choice. So companies are required to research and develop sustainable processes or adapt existing ones. This research has been...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1068/1/012019