Performance on Water Stability of Cement-Foamed Asphalt Cold Recycled Mixture

Evaluation of the Mechanical Properties of the cement treated Cold-in-Place Recycled Asphalt Mixtures

Cold-in-place recycling (CIR) is an environmentally sustainable alternative for preservation of asphalt pavements. A major disadvantage of this practice is the lower strength of the cold-in-place mixtures. Addition of cement into this type of mixture is a method for increasing its bearing capacity. The effect of cement content on the mechanical properties of the cold-in-place recycled asphalt m...

Laboratory Evaluation of High Asphalt Binder Replacement with Recycled Asphalt Shingles (ras) for a Low N-design Asphalt Mixture

This study investigated the effect of high asphalt binder replacement for a low N-design asphalt mixture including RAP and RAS on performance indicators such as permanent deformation, fracture, fatigue potentials, and stiffness, was studied. An experimental program included complex modulus, fracture, overlay reflective cracking resistance, wheel track permanent deformations, and push-pull fatig...

Evaluation of the Effects of Recycled Asphalt Pavement (rap) on an Ndot Hma Mixture

Influence of Waxes on Bitumen and Asphalt Concrete Mixture Performance

This doctoral thesis consists of a literature review, presented in two papers, and another six papers describing experimental studies of the influence of different kinds of wax and polyphosporic acid on bitumen and asphalt concrete mixture properties. The literature review should give an extensive description of the field of knowledge concerning wax in bitumen. Effects of wax in crude oil, bitu...

Performance of Recycled Asphalt Shingles in Hot Mix Asphalt: TPF-5(213)

US transportation agencies have been increasingly using recycled asphalt shingles (RAS) in hot mix asphalt (HMA) applications over the last 25 years. Initial use of RAS started with recycled postmanufacturers shingles, but now agencies are showing a growing interest in using post-consumer (tear-off) RAS in asphalt applications. Post-consumer asphalt shingles typically have 20 to 30 percent asph...