Performances of a Small-Aspect-Ratio Compressor Blade Cascade.

Numerical Investigation of Single Stage of an Axial Flow Compressor for Effects of Blade Aspect Ratio

In present work, a compressor configuration is taken from literature which will be studied for aspect ratio (ratio between length of blade to chord length) influence over performance. Performance in the sense is pressure ratio of compressor. The aspect ratio of the blade is an important parameter and has a strong influence on the performance of axial flow compressor. There are so many literatur...

The Impact of S/D Ratio on Compressor Performances

Life Estimate of a Compressor Blade through Fractography

Failure analysis of fractured components provides some information about the causes and conditions of fracture. Fractography is an indispensable part of the failure analysis as it is usually the only means by which the failure mechanism can be established. By using fractography, some information such as component’s life, values of the stress intensity factor and the applied stress can be calcul...

Stall Vortex Shedding over a Compressor Cascade (RESEARCH NOTE)

The unstable flow with rotating-stall-like (RS) effects in a rotor-cascade of an axial compressor was numerically investigated. The RS was captured with the reduction in mass flow rate and increasing of exit static pressure with respect to design operating condition of the single rotor. The oscillatory velocity traces during the stall propagation showed that the RS vortices repeat periodically,...

Stall Vortex Shedding Over a Compressor Cascade (RESEARCH NOTE)

The unstable flow with rotating-stall-like (RS) effects in a rotor-cascade of an axialcompressor was numerically investigated. The RS was captured with the reduction in mass flow rateand increasing of exit static pressure with respect to design operating condition of the single rotor.The oscillatory velocity traces during the stall propagation showed that the RS vortices repeatperiodically, and...