PERHITUNGAN KAPASITAS DUKUNG FONDASI TIANG TUNGGAL MENGGUNAKAN CLUSTERING DATA STANDARD PENETRATION TEST (SPT)
نویسندگان
چکیده
منابع مشابه
Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data
In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, 
failure zone and plunging failure of p...
متن کاملComparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data
In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, failure zone and plunging failure of pil...
متن کاملValidation and application of empirical shear wave velocity models based on standard penetration test
Shear wave velocity is a basic engineering tool required to define dynamic properties of soils. In many instances it may be preferable to determine Vs indirectly by common in-situ tests, such as the Standard Penetration Test. Many empirical correlations based on the Standard Penetration Test are broadly classified as regression techniques. However, no rigorous procedure has been published for c...
متن کاملA Method for Predicting Pile Capacity Using Cone Penetration Test Data
The massive construction in poor lands has encouraged engineers to use deep foundations in order to transfer superstructure loads to the subsoil. Since soil excavation, sampling, and laboratory testing as a part of site investigation are relatively difficult, in-situ tests such as cone penetration test (CPT) as a very informative test may be recommended. The CPT has been widely used in engineer...
متن کاملSubsurface Exploration Using the Standard Penetration Test and the Cone Penetrometer Test
The Standard Penetration Test (SPT) and Cone Penetrometer Test (CPT) have become industry standards for subsurface geotechnical investigations using small diameter (<8-in. [20-cm]) borings and soundings. Both procedures have evolved over a period of 100 and 70 years, respectively, and have been adopted as ASTM standards. Each procedure has certain advantages over the other, but both can elicit ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Matriks Teknik Sipil
سال: 2020
ISSN: 2723-4223,2354-8630
DOI: 10.20961/mateksi.v8i1.41517