Permanent Deformation Behavior under Repeated Load of Recycled Material Stabilized with Bitumen Emulsion
نویسندگان
چکیده
منابع مشابه
Cold in-place recycling with bitumen emulsion
The cold in-place recycling (CIPR) is a process where the existing bituminous pavement is recycled without application of heat. In CIPR process the scarified material from the existing pavement is crushed to the required gradation and binder in cold form (emulsion or cutback or foamed bitumen) is added. Externally acquired Reclaimed Bituminous Pavement (RBP) or fresh aggregates are also added d...
متن کاملexperimental evaluation of collpase deformation behavior of a rockfill material
to investigate the saturation induced collapse deformation behavior of rockfill material, a set of large-scale triaxial tests were conducted in saturated and dry-saturated conditions. specimens were tested under various confining pressures. for dry-saturated tests, specimens were sheared in various stress levels. results of all dry saturated tests indicate a sudden reduction in the specimen vol...
متن کاملBslA-stabilized emulsion droplets with designed microstructure
Emulsions are a central component of many modern formulations in food, pharmaceuticals, agrichemicals and personal care products. The droplets in these formulations are limited to being spherical as a consequence of the interfacial tension between the dispersed phase and continuous phase. The ability to control emulsion droplet morphology and stabilize non-spherical droplets would enable the mo...
متن کاملNumerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load
Distortion and deformation of tubes during machining operations are very important. In this study, a tube used in magnetic drum separator under concentrated load (machining load) is considered. Using finite element simulation, deformities and their dependence on parameters such as the thickness of the tube and the place of concentrated force are observed and predicted. To compare and confirm th...
متن کاملThe Thermo-Rheological Behavior of Bitumen
As a very important coating material in different applications, bitumen is a complex mixture of different chemicals. It is generally accepted that the principle of time-temperature superposition (TTS) holds for this material. In this study rheological measurements were carried out on four different bitumens. Different representations of the experimental data were examined to check failure or ho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Journal
سال: 2022
ISSN: ['1906-3636']
DOI: https://doi.org/10.4186/ej.2022.26.4.13