Perpendicular Guideway Mechanism of Machine Tool (3rd Report)

Report on the 3rd International ESCOP-Symposium.

MagneMotion Maglev Demonstration on ODU Guideway

MagneMotion and Old Dominion University undertook a cooperative agreement to demonstrate the MagneMotion M3 urban maglev technology on an existing elevated guideway on the ODU campus in Norfolk VA. M3 was designed for urban applications with speeds up to 100 mph, acceleration up to 1.6 m/s2, and a 60 foot turn radius. Figure 1 shows the “sled” vehicle on the ODU guideway. This vehicle was weigh...

Personal report of the 3rd ECMDA-FA'07 conference

2 ECMDA : Main Conference (June 13, 2007) 2 2.1 Keynote : Stuart Kent (Microsoft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.2 Session A : Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.3 Session B : Foundations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.4 Session C : Applications . . . . . . . . . . . . . . ....

Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System

Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...

Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System

Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...