Phase evolution in an MCrAlY coating during high temperature exposure

High Temperature Behavior of Dual Phase Steels

Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...

Some aspects of elemental behaviour in HVOF MCrAlY coatings in high-temperature oxidation

Progress in Development of High-temperature Solar-selective Coating

Improving the properties of the selective coating on the receiver represents one of the best opportunities for improving the efficiency of parabolic trough collectors and reducing the cost of solar electricity. Additionally, increasing the operating temperature above the current operating limits of 400oC can improve power cycle efficiency and reduce the cost of thermal energy storage resulting ...

high temperature behavior of dual phase steels

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...

High-temperature degradation of plasma sprayed thermal barrier coating systems

Thermal barrier coating systems (TBCs) are used in gas turbines to prevent high-temperature degradation of metallic materials in the combustor and turbine. One of the main concerns regarding TBCs is poor reliability, and accurate life prediction models are necessary in order to fully utilise the beneficial effects of TBCs. This research project aims at developing deeper understanding of the deg...