Phase Separation in PM2000 Fe-Base ODS Alloy
نویسندگان
چکیده
منابع مشابه
Grain Boundary Mobility in Fe-Base Oxide Dispersion Strengthened PM2000 Alloy
An alloy can be created without melting, by violently deforming mixtures of different powders. As first discovered by Benjamin, inert oxides can also be introduced into the microstructure using this technique. The resulting dispersion-strengthened alloyed powders are then consolidated using hot-isostatic pressing and extrusion, to produce a solid with a very fine grain structure on a sub-microm...
متن کاملPhase Separation kinetics in Fe-Cr-Al alloy
9 The α α phase separation kinetics in a commercial Fe-20 wt% Cr-6% Al oxide dispersion-strengthened PM 1
متن کاملFabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 alloy using Selective Laser Melting**
The expansion in application of the selective laser melting (SLM) process for fabrication of new alloy materials continues. However, to date, there has been no investigation of the effect of this process on the final microstructure of ‘melt sensitive’ powder alloys such as mechanically alloyed oxide dispersion strengthened (ODS) FeCrAl. In this study commercial PM2000 powder, a ferritic ODS all...
متن کاملImproved ODS Alloy for Heat Exchanger Tubing
The Department of Energy (DOE), National Energy Technology Center (NETL), has initiated a strategic plan for the development of advanced technologies needed to design and build fossil fuel plants with very high efficiency and environmental performance. These plants, referred to as “Vision 21” by DOE, will produce electricity, chemicals, fuels, or a combination of these products, and possibly se...
متن کاملLiquid-liquid phase separation of freely falling undercooled ternary Fe-Cu-Sn alloy.
The active modulation and control of the liquid phase separation for high-temperature metallic systems are still challenging the development of advanced immiscible alloys. Here we present an attempt to manipulate the dynamic process of liquid-liquid phase separation for ternary Fe47.5Cu47.5Sn5 alloy. It was firstly dispersed into numerous droplets with 66 ~ 810 μm diameters and then highly unde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2007
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927607071231