Phase Transformation under Continuous Cooling Conditions in Medium Carbon Microalloyed Steels
نویسندگان
چکیده
منابع مشابه
Strong Bainitic Steels by Continuous Cooling Transformation
Using metallurgical models, three steels were designed to obtain carbide-free bainitic structures in the as-rolled condition. Experimental castings were hot-rolled in a pilot mill and their austenite decomposition kinetics were measured using dilatometry. Tensile and Charpy impact properties were measured and the microstructures were characterised using X-ray diffractometry, optical and scannin...
متن کاملMetallographic techniques for the determination of the austenite grain size in medium-carbon microalloyed steels
Different techniques have been investigated to seek the best procedure to reveal the prior-austenite grain boundaries in three medium-carbon microalloyed steels. This study has been carried out over a wide range of temperatures (950–1250 C) and it has been found that thermal etching (TE) is the best technique to reveal the prior-austenite grain boundaries in these steels. D 2001 Elsevier Scienc...
متن کاملEquilibrium Model of Precipitation in Microalloyed Steels
The formation of precipitates during thermal processing of microalloyed steels greatly influences their mechanical properties. Precipitation behavior varies with steel composition and temperature history and can lead to beneficial grain refinement or detrimental transverse surface cracks. This work presents an efficient computational model of equilibrium precipitation of oxides, sulfides, nitri...
متن کاملThe Effects of Finish Rolling Temperature and Cooling Interrupt Conditions on Precipitation in Microalloyed Steels Using Small Angle Neutron Scattering
Small angle neutron scattering (SANS) was used to quantify the precipitate characteristics (i.e., mean precipitate size, number of precipitates, and distribution broadening) in X-70 and X-80 pipeline steel and in grades 80 and 100 microalloyed steel plate. The precipitate distributions measured for the different steels were correlated with the finish rolling temperature (FRT) and cooling interr...
متن کاملContinuous Cooling Transformation in Cast Duplex Stainless Steels CD3MN and CD3MWCuN
The kinetics of brittle phase transformation in cast duplex stainless steels CD3MN and CD3MWCuN was investigated under continuous cooling conditions. Cooling rates slower than 5 °C/min. were obtained using a conventional tube furnace with a programable controller. In order to obtain controlled high cooling rates, a furnace equipped to grow crystals by means of the Bridgman method was used. Samp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science & Technology
سال: 2014
ISSN: 1005-0302
DOI: 10.1016/j.jmst.2014.03.015