Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels
نویسندگان
چکیده
منابع مشابه
Some phase transformations in steels
About 70% of all the steel compositions that are currently used have been developed within the last 10 years. Novel iron alloys are being conceived, manufactured, and marketed with a regularity which has confounded many prophecies. Phase transformation theory has contributed to the successful development of steels. This overview will begin therefore with a discussion of the atomic mechanism by ...
متن کاملStablization of Nanotwinned Microstructures in Stainless Steels Through Alloying and Microstructural Design
In this STIR we proposed to investigate the microstructure and alloy composition on the formation and stability of nanotwinned microstructures. The long-term alloy design strategy focuses on microalloying additions to 1) reduce the stacking fault energy (SFE), enhance twinning formation, and increase twin volume fraction; 2) reduce the twin size via increasing interstitial content while also ta...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملMicrostructural Characterization of Carburized Steels
*Member of ASM International arburizing has been a popular method for obtaining a unique balance of properties in steels for many years. Steels with low carbon contents are characterized by good toughness and good ductility, but low strength and low wear resistance. By locally increasing the carbon content at the surface, followed by heat treatment to produce a very high hardness in this layer ...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2007
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-007-9211-9