Phased Array Ultrasonic Application for Defects Estimation of FRP Box Member
نویسندگان
چکیده
منابع مشابه
Application of Phased Array Ultrasonic Testing Technology on Inservice Wheel
In this paper, an Ultrasonic testing method for inservice wheel by use of phased array technology is introduced. To meet the ultrasonic test criterion of inservice CRH wheel, groups of phased array probes and conventional probes are combined used. By study echo wave in wheel rim and wheel disk form different probes, defect analyzing methods in wheel rim and wheel disk are studied. Tests on CRH ...
متن کاملApplication of ultrasonic phased array in acoustic logging
A new ultrasonic phased array transducer to increase the imaging resolution of the borehole wall is presented for acoustical logging. We fabricate a cylindrical phased array which is made up of 128 piezoelectric elements distributed on the surface of a cylinder uniformly. The working frequency of each element is 0.5MHz. Through the switch array, different combinations of the elements can lead a...
متن کاملBiplane Phased Array for Ultrasonic Medical Imaging
We report a transducer structure tha t combines two orthogonal phased arrays which enable the real-time scanning of two orthogonal sectors. This biplane phased array is formed by partially dicing the opposite faces of a composite piezoelectric plate in orthogonal directions. Individual elements of the orthogonal arrays show broad radiation patterns close to the theoretical expectations for isol...
متن کاملPhased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملPhased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Korean Society of Agricultural Engineers
سال: 2010
ISSN: 1738-3692
DOI: 10.5389/ksae.2010.52.5.069