Phosphorus Partition Between Liquid Crude Steel and High-Basicity Basic Oxygen Furnace Slags Containing V2O5
نویسندگان
چکیده
Abstract The influence of V 2 O 5 on the phosphorus partition between liquid crude steel and heterogenous basic oxygen furnace (BOF) slag with CaO/SiO = 4.2 was investigated at a temperature 1600 °C in middle frequency induction furnace. Thereby transfer from “steel to slag” as well “slag steel” studied over holding time 60 minutes. measured results were shown capacity compared experimental values literature. It found that highly BOF slags decreases capacity. In addition, resulting using scanning electron microscope (SEM).
منابع مشابه
Basic Oxygen Furnace steel slag and apatite for sustainable phosphorus removal at small wastewater treatment plants
Recent developments in phosphorus (P) removal have focused on P reactive materials to use within constructed wetlands (CW), as a sustainable alternative to chemical dosing. In this study, different fractions of Basic Oxygen Furnace (BOF) steel slag and apatite media have been tested in full-scale CWs, being the first trial of its kind in the United Kingdom evaluating the P removal capacity of b...
متن کاملEnhanced phosphorus removal from wastewater by growing deep-sea bacterium combined with basic oxygen furnace slag.
As one solid waste with potential for phosphorus removal, application of slags in water treatment merits attention. But it was inhibited greatly by alkaline solution (pH>9.5) and cemented clogging generated. To give one solution, phosphorus removal was investigated by combining deep-sea bacterium Alteromonas 522-1 and basic oxygen furnace slag (BOFS). Results showed that by the combination, not...
متن کاملEvaluation of Long Term Ageing of Asphalt Mixtures Containing EAF and BOF Steel Slags
This study was conducted in order to evaluate the effects of long term ageing on toughness and resilient modulus of asphalt concrete mixtures containing Electric Arc and Basic Oxygen Furnace steel slags. After initial evaluation of the properties of steel slags using X-ray Diffraction and Scanning Electric Microscope, eleven sets of laboratory mixtures were prepared. Each set was treated replac...
متن کاملLeaching of basic oxygen furnace sludge with sulphuric acid
In this study the hydrometallurgical processing of BOF sludge in the sulphuric acid solutions under atmospheric pressure and temperatures up to 100 °C is investigated on a laboratory scale. The influence of sulphuric acid concentration, temperature, time and liquid to solid ratio (L:S) on the leaching process was studied. The main aim of this study was to determine optimal conditions when the m...
متن کاملBofy-fuzzy logic control for the basic oxygen furnace (BOF)
In this paper, fuzzy modeling for the control of basic oxygen furnace (BOF) processes is proposed. BOF is a widely preferred and effective steel making method due to its higher productivity and considerably low production cost. Therefore, today almost 65% of the total crude steel production in the world is met by using the BOF method. Higher steel output at lower cost is one of the main objecti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science
سال: 2023
ISSN: ['1543-1916', '1073-5615']
DOI: https://doi.org/10.1007/s11663-023-02778-5