Photo-curable Resins for UV Nanoinprint and their Evaluation Methods
نویسندگان
چکیده
منابع مشابه
UV-curable Encapsulants for LED
UV cured epoxy systems represent complementary technology to the established heat cured epoxy systems for coating, adhesion and encapsulation of electronic devices. The UV cured epoxy systems offer significant benefits in terms of fast cure and thus very short production cycle time; low stress and better colour due to room temperature cure; process wise no mix ratio problem or anhydride handlin...
متن کاملNICE and Coors UV-Curable Coatings for Aluminum Can Production
Over the last two years, the Coors Brewing Company has been conducting a pollution prevention and energy conservation project jointly with the DOE, EPA and Colorado Office of Energy Conservation, utilizing the NICE (National Industrial Competitiveness through Energy, Environment, and Economics) program. The goals of the project are to investigate a can printing technology developed at Coors, an...
متن کاملRheological Studies of UV - curable Materials
The challenge for studying fast changing systems with rheology such as UV initiated polymerization and crosslinking is multifold. These materials react within seconds and the moduli change over 2 to 3 decades. UV light must irradiate the sample homogeneously over a short time period and fast data acquisition is required to capture the modulus change during the reaction. An option for UV curing,...
متن کاملCan-Printing Process Uses UV-Curable Coating
Approximately 100 billion aluminum cans are produced annually, mainly for the beverage industry. Early technologies for decorating the cans often used solvent-based coatings containing solvents at concentrations of -70% to 75% by volume (Randall 1992). The solvent composition was typically a mixture of aliphatic hydrocarbons, aromatics, ethers, cellosolves, and acetates. Unfortunately, this met...
متن کاملUV curable sulfonated hybrid materials and their performance as proton exchange membranes
In this study 2-acrylamido-2-methylpropanesulfonic acid (AMPS) containing UV curable nanocomposite membranes were prepared by using the sol–gel method. Tetraethylorthosilicate (TEOS), and 3-(methacryloyloxy)propyl trimethoxysilane (MAPTMS) were used, respectively as an inorganic precursor and coupling agent. Cross linking agents such as poly(ethylene glycol diacrylate) (PEGMA) and ethylene glyc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KOBUNSHI RONBUNSHU
سال: 2009
ISSN: 0386-2186,1881-5685
DOI: 10.1295/koron.66.88