Physical properties of Cu2O thin films prepared by Silar method
نویسندگان
چکیده
منابع مشابه
Morphological Tailoring of Thin Films Prepared by Low Cost SILAR Method
The growth of highly textured Zinc oxide (ZnO) thin films with a preferred (101) orientation has been prepared by employing Successive ionic layer growth by Adsorption Reaction (SILAR) using a sodium zincate bath on glass substrates has been reported. Morphology of the films were found to be varying well from stacked nanorods to shoots of nanotubes and clustered spherical and hilly morphology w...
متن کاملPhysical properties of CdSexTe1-x thin films prepared by electrodeposition
The cadmium chalcogenides CdSexTe1-x ( 1 x 0 ≤ ≤ ) thin films have been electrodeposited onto ITO coated glass substrates from an acid sulfate solution at 90 °C. The structure, the composition and the morphology have been studied as a function of the x coefficient by XRD, EDAX, optical absorbance and AFM techniques. All deposits have a cubic structure with a preferred orientation along the (111...
متن کاملMicrostructure and optical properties of nanocrystalline Cu2O thin films prepared by electrodeposition
Cuprous oxide (Cu2O) thin films were prepared by using electrodeposition technique at different applied potentials (-0.1, -0.3, -0.5, -0.7, and -0.9 V) and were annealed in vacuum at a temperature of 100°C for 1 h. Microstructure and optical properties of these films have been investigated by X-ray diffractometer (XRD), field-emission scanning electron microscope (SEM), UV-visible (vis) spectro...
متن کاملMechanical Properties of Cu2O Thin Films by Nanoindentation
In this study, the structural and nanomechanical properties of Cu₂O thin films are investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and nanoindentation techniques. The Cu₂O thin films are deposited on the glass substrates with the various growth temperatures of 150, 250 and 350 °C by using radio frequency magnetron sputtering. The XRD re...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Pamukkale University Journal of Engineering Sciences
سال: 2017
ISSN: 1300-7009,2147-5881
DOI: 10.5505/pajes.2016.58672