Physico-Mechanical and Biological Durability of Citric Acid-Bonded Rubberwood Particleboard
نویسندگان
چکیده
منابع مشابه
Natural Durability and Performance of Hornbeam Cement Bonded Particleboard
Cement bonded particleboards were manufactured from hornbeam (Carpinus betulus L.) wood particles. Hydration tests were carried out to determine the inhibitory index in order to characterise wood-cement compatibility. The results revealed that the mixture of hornbeam -cement can be classifi ed as moderate inhibition. Two wood: cement ratios were applied in this study, namely 1:3 and 1:4, for th...
متن کاملLow Density Sugarcane Bagasse Particleboard Bonded with Citric Acid and Sucrose: Effect of board density and additive content
The development of natural adhesives derived from non-fossil resources is very important for the future. In this study, by taking sugarcane bagasse as the raw material, without using any synthetic resin but adding some eco-friendly additives (citric acid and sucrose), low density particleboards were successfully developed. The effects of board density and additive contents on the physical and m...
متن کاملMechanical properties and dimensional stability of cement bonded particleboard from rice husk and sawdust
This study was conducted to evaluate the properties of cement bonded particleboard made from rice husk and sawdust. Sawdust and rice husk fine boards were made using two ratios of cement and particles of 70:30 and 80:20, but rice husk coarse was made with a ratio of cement and particle of 80:20. The density of sawdust and rice husk fine boards in a ratio of cement and particles of 70:30 was 960...
متن کاملmodification of nanoclay for improving the physico-mechanical properties of dental adhesives
هدف اصلی این مطالعه تهیه یک سامانه نوین چسب عاجی دندانی بر پایه نانورس پیوند شده با پلی متاکریلیک اسید، نانورس پیوند شده با پلی اکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی متاکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی اکریلیک اسید و نانورس پیوند شده با کیتوسان اصلاح شده با گلایسیدیل متاکریلات است. پیوند پلی متاکریلیک اسید و پلی اکریلیک اسید بر ری سطح نانورس در حضور و ...
Effects of the Addition of Citric Acid on Tannin-Sucrose Adhesive and Physical Properties of the Particleboard
The effects of citric acid on the curing properties of tannin-sucrose adhesives and on the physical properties of particleboard utilizing the adhesives were investigated. The citric acid content of tannin-sucrose adhesive was adjusted to 0.4, 1.8, 4.6, 13.8, 20.0, and 33.3%, which corresponded to pH values of the adhesive 40 wt% solution at 3.8, 3.0, 2.5, 2.0, 1.8, and 1.5, respectively. Therma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2020
ISSN: 2073-4360
DOI: 10.3390/polym13010098