Picosecond laser seal welding of glasses with a large gap
نویسندگان
چکیده
منابع مشابه
Friction Welding of Zr55Al10Ni5Cu30 Bulk Metallic Glasses
The friction welding of Zr55Al10Ni5Cu30 bulk metallic glasses (BMG) has been tried. An apparatus for the friction welding of BMGs adopting a pneumatic cylinder and gripper based on a conventional lathe, and a welding process which provides a sufficient cooling rate after welding were devised. Friction time and friction pressure were chosen as the control parameters in the friction welding proce...
متن کاملAvoiding the requirement for pre-existing optical contact during picosecond laser glass-to-glass welding.
Previous reports of ultrafast laser welding of glass-to-glass have indicated that a pre-existing optical contact (or very close to) between the parts to be joined is essential. In this paper, the capability of picosecond laser welding to bridge micron-scale gaps is investigated, and successful welding, without cracking, of two glasses with a pre-existing gap of 3 µm is demonstrated. It is shown...
متن کاملTransmission Welding of Glasses by Femtosecond Laser: Structural and Mechanical Properties
Femtosecond laser pulses were focused on the interface of two glass specimens. Proper use of optical and laser processing parameters enables transmission welding. The morphology of the weld cross section was studied using differential interference contrast optical microscopy. The changes in mechanical properties of the weld seams were studied through spatially resolved nanoindentation, and inde...
متن کاملUnderlay tympanoplasty with laser tissue welding.
We investigated the feasibility of using laser tissue welding techniques to perform transcanal underlay tympanoplasty. We used 10 temporal bones obtained from human cadavers. After creating a subtotal tympanic membrane perforation, we introduced harvested periosteum through the perforation and used laser tissue welding to secure the periosteum graft in place in an underlay fashion. The procedur...
متن کاملLASER WELDING - Literature Review
Lasers are now being used in the automotive industry to produce seam or stitch welds, as alternatives to conventional resistance spot welding, which are used extensively for attaching auto-body panels to subassemblies. The advantages of laser welding over resistance spot welding result from the smallness of the laser spot size, the large penetration depth of the weld into the material and the r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2019
ISSN: 1094-4087
DOI: 10.1364/oe.27.030297