Piercing Process by Punch Striking Using Ultrasonic Vibration
نویسندگان
چکیده
منابع مشابه
Separation Process of Fine Coals by Ultrasonic Vibration Gas-Solid Fluidized Bed
Ultrasonic vibration gas-solid fluidized bed was proposed and introduced to separate fine coals (0.5-0.125 mm fraction). Several technological methods such as XRF, XRD, XPS, and EPMA were used to study the composition of heavy products to evaluate the separation effect. Results show that the ultrasonic vibration force field strengthens the particle separation process based on density when the v...
متن کاملDisplacement of Droplets on a Surface Using Ultrasonic Vibration
Liquids handling is an important issue in biomedical analysis. We propose two different devices for ultrasonic droplets displacement. Each one involve a different physical phenomenon. The first device proposed is a low frequency standing waves using flexural plate waves (FPW). In this case, acoustic radiation pressure is involved for the displacement. The second one uses high frequency travelli...
متن کاملA miniature surgical drill using ultrasonic/sonic frequency vibration
A study is presented of a miniature ultrasonic surgical drill designed for bone biopsy, based on an ultrasonic/sonic drill which converts high frequency to low frequency vibrations through a freely vibrating mass between an ultrasonic transducer-horn and a drill bit. For conventional surgical drilling using a rotary drill or an ultrasonic drill, considerable power is required to penetrate into ...
متن کاملAnalysis of heat generation using ultrasonic vibration for post removal.
This study measured the temperature of the root surface and post during the application of ultrasonic vibration to cemented posts to simulate post removal procedure. Root canal therapy was performed on ten extracted maxillary incisors. A stainless steel Parapost was cemented into each prepared post space. Ultrasonic vibration was applied to the post and temperatures were recorded at the coronal...
متن کاملProcess Monitoring Using Optical Ultrasonic Wave Detection
Certain microstructural features of materials, such as grain size in metals, porosity in ceramics, and structural phase compositions, are important for determining mechanical properties. Many of these microstructural features have been characterized by ultrasonic wave propagation measurements, such as wave velocity and attenuation. Real-time monitoring of ultrasonic wave propagation during the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Technology of Plasticity
سال: 2006
ISSN: 0038-1586,1882-0166
DOI: 10.9773/sosei.47.885