Piezoceramic (PZT) patch in Impulse hammer for modal analysis
نویسندگان
چکیده
منابع مشابه
ARMAX Modal Parameter Identification for Structures Excited with Piezoceramic Actuators
Experimental methods used to determine the dynamic behaviour of helicopter structures can be broadly categorised as either ground testing methods or in-flight testing methods. A major limitation of ground testing is that dynamic properties determined from a grounded helicopter structure are usually significantly influenced by the boundary conditions. Therefore, it is desirable to carry out test...
متن کاملReliability of piezoceramic patch sensors under cyclic mechanical loading
Piezoceramic patch sensors have to withstand the primary stresses and strains of a structure during operation. In the leading project ‘Adaptronics’ a lifespan of 106 cycles at 0.1% strain was required for sensors applied on components of steel and carbon fibre reinforced plastic (CFRP). In order to test the reliability of the patches themselves and of their adhesion on the substrate, special fo...
متن کاملDevelopment of an Automated Impact Hammer for Modal Analysis of Structures
This report outlines the development and testing of a prototype compact automated impact hammer designed to be surface mounted on a structure to provide an impulse-based structural excitation source for vibration testing. The automated device was designed to be integrated with a distributed fibre optic sensing system which measures the in-plane dynamic strain of the structure at a spatially den...
متن کاملInterfacial Debonding Behavior of Composite Beam/plates with Pzt Patch
Wang Liang, Bai Rui-xiang*, Yan Cheng State Key Laboratory of Structural Analysis for Industrial Equipment Dalian University of Technology, Dalian 116024, P.R. China * Corresponding author: [email protected] Abstract: This paper studies interfacial debonding behavior of composite beams bonded with piezoelectric material. The focus is put on crack initiation and growth of the piezoelectric adhes...
متن کاملA Patch-Based Approach for Removing Impulse or Mixed Gaussian-Impulse Noise
In this paper, we address the problem of the restoration of images which have been affected by impulse noise or by a mixture of Gaussian and impulse noise. We rely on a patch-based approach, which requires careful choices for both the distance between patches and for the statistical estimator of the original patch. Experiments are led in the case of pure impulse noise and in the case of a mixtu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indian Journal of Science and Technology
سال: 2009
ISSN: 0974-6846,0974-5645
DOI: 10.17485/ijst/2009/v2i3.1