Pitting Corrosion of Copper in Aqueous Solutions Containing Phosphonic Acid as an Inhibitor
نویسندگان
چکیده
منابع مشابه
Investigation of Furfural as Corrosion Inhibitor in Hydrochloric Acid Solution
Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...
متن کاملInvestigation of Furfural as Corrosion Inhibitor in Hydrochloric Acid Solution
Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...
متن کاملCorrosion and Inhibition Studies of Copper in Aqueous Solutions of Formic Acid and Acetic Acid
Corrosion behaviour of copper has been investigated in different compositions of formic acid and acetic acid at 30°C by a potentiostatic method. The maximum corrosion rate was found in 2&40mol/o formic acid and in 20 mol/o acetic acid in aqueous solution mixtures. The corrosion rate depended on the concentration of either acid. Formic acid is observed to be more corrosive than acetic acid. The ...
متن کاملSolanum Tuberosum as an Inhibitor of Mild Steel Corrosion in Acid Media
Acid extract of Solanum tuberosum was tested as corrosion inhibitor for mild steel in 1 M HCl and H2SO4 media using different techniques: Weight loss (in different temperatures viz., 303, 313 and 323 K), Potentiodynamic polarization, Electrochemical Impedance Spectroscopy (EIS) and SEM techniques. The studies reveal that the plant extract act as good inhibitors in both...
متن کاملCorrosion behaviour of mild steel in aqueous acetic acid solutions containing different amounts of formic acid
The kinetics of mild steel corrosion in 20:0, 19:1, 18:2 and 15:5 (v/v%) aqueous mixture of acetic and formic acids has been investigated by weight loss and potentiostatic polarization techniques. The effects of composition of electrolyte and temperature on the corrosion rate of mild steel have been evaluated. The corrosion rate of mild steel increased linearly with temperature as well as amoun...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Zairyo-to-Kankyo
سال: 1993
ISSN: 0917-0480,1881-9664
DOI: 10.3323/jcorr1991.42.558