Pitting Damage Morphology of Surface Modified Material −Damage Suppression by Surface Hardening Treatment−
نویسندگان
چکیده
منابع مشابه
Study of the Frictional Surface Damage Using Acoustic Emission Method
In this study, the change at rubbing surfaces has been investigated experimentally using an acoustic emission signal monitoring system. A steel ring is slipped on the surface of a metallic sheet to simulate frictional conditions. The mechanical disturbances caused by the movement of the ring produce stress waves propagating along the sheet surface. The out of plane displacement of the sheet su...
متن کاملMagnetic Hardening of Sm2Fe17N3 by Radiation Damage
Pinning type coercivity has been induced in large sø50 mmd particles of Sm2Fe17N3 by irradiation with 5 GeV Pb561 ions. Mössbauer spectroscopy is used to analyze the structure of the defects and estimate their volume. Magnetization measurements indicate that the induced defects are anisotropic in shape. A model of strong pinning by cylindrical defects is employed to deduce a defect radius of or...
متن کاملA damage model incorporating dynamic plastic yield surface
In this paper, a general elastoplastic-damage constitutive model considering the effect of strain rate has been developed. The derivation of this model has been cast into the irreversible thermodynamics with internal variables within the fundamentals of Continuum Damage Mechanics (CDM). The rate effect has been involved as an additional term into the plastic yield surface (dynamic plastic yield...
متن کاملGear Fault Detection Effectiveness as Applied to Tooth Surface Pitting Fatigue Damage
A study was performed to evaluate fault detection effectiveness as applied to gear tooth pitting fatigue damage. Vibration and oil-debris monitoring (ODM) data were gathered from 24 sets of spur pinion and face gears run during a previous endurance evaluation study. Three common condition indicators (RMS, FM4, and NA4) were deduced from the time-averaged vibration data and used with the ODM to ...
متن کاملAnalysis of Keratin Fibre Damage under Various Surface Treatment Conditions
This paper investigates the effect of three different treatments, namely (i) sunlight exposures, (ii) bleaching and (iii) perming on the damage of the keratin fibres (with the use of human hair). Scanning electron microscopy was applied to examine the surface morphology of the samples. Hair samples appeared to be rougher and their scales diminished after the treatments. The degree of colour cha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2008
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.57.159