PLA Melt Stabilization by High-Surface-Area Graphite and Carbon Black
نویسندگان
چکیده
منابع مشابه
Preparation of High Surface Area ZrO2 Nanoparticles
In comparison to the previous researches, ZrO2 nanoparticles with higher surface area (85 m2/g) have been synthesized in this research. The as-prepared ZrO2 nanoparticles by co-precipitation method were characterized with X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The surface area of the s...
متن کاملDispersion of graphite nanoplates during melt mixing
Graphite nanoplates (GnPs) are exfoliated graphite particles in the form of thin flakes—with large surface areas and nanosized thicknesses— that tend to agglomerate because of van der Waals interactions. GnPs are commonly used to reinforce composite materials. It is expected that maximum composite performance levels should occur when GnP agglomerates are dispersed within the polymer matrix as p...
متن کاملFlexible graphite modified by carbon black paste for use as a thermal interface material
Polyol-ester-based carbon black pastes are used to either coat or penetrate flexible graphite, thereby increasing the thermal contact conductance of flexible graphite between copper surfaces. Paste penetration by up to an effective paste thickness (the volume of the penetrated paste divided by the geometric area of the flexible graphite) of 5 lm increases the conductance by up to 350%, 98% and ...
متن کاملPreparation, Surface and Pore Structure of High Surface Area Activated Carbon Fibers from Bamboo by Steam Activation
High surface area activated carbon fibers (ACF) have been prepared from bamboo by steam activation after liquefaction and curing. The influences of activation temperature on the microstructure, surface area and porosity were investigated. The results showed that ACF from bamboo at 850 °C have the maximum iodine and methylene blue adsorption values. Aside from the graphitic carbon, phenolic and ...
متن کاملEnhancement of lithium storage performance of carbon microflowers by achieving a high surface area.
High-surface-area, nitrogen-doped carbon microflowers (A-NCFs-4) assembled from porous nanosheets are prepared in a three-step process: soft-templating self-assembly, thermal decomposition, and KOH activation. The hydrazine hydrate used in our experiment serves not only as a structure-directing agent, but also as a nitrogen source. The resultant A-NCFs-4 has a hierarchical porous structure and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2018
ISSN: 2073-4360
DOI: 10.3390/polym10020139