Planar Manipulator using Stackable 4-BAR Mechanisms
نویسندگان
چکیده
منابع مشابه
Some New Parallel Mechanisms Containing the Planar Four-Bar Parallelogram
A parallelogram allows the output link to remain at a fixed orientation with respect to an input link, for which it acts as a unique role in the design of parallel mechanisms. In this paper, the unique role of a parallelogram is used completely to design some new parallel mechanisms with two to six degrees of freedom (DoFs). In these mechanisms, some with three DoFs possess the advantage of ver...
متن کاملMotion planning for planar n-bar mechanisms with revolute joints
Maximizing the use of dual-arm robotic systems requires the development of planning algorithms analogous to those available for single-arm operations. In this paper, the global properties of the configuration spaces of planar n-bar mechanisms (i.e., kinematic chains forming a single closed loop) are used to design a complete motion planning algorithm. Numerical experiments demonstrate the algor...
متن کاملPlanar Parallel 3-rpr Manipulator
This paper describes the design, construction, and control of a planar three degree-of-freedom (dof) inparallel-actuated manipulator at Ohio University. The actuators are three pneumatic cylinders. Using real-time closed-loop feedback control for each actuator length independently, we develop inverse pose and resolved-rate control for this manipulator. The objective of this work is to implement...
متن کاملBuilding a Universal Planar Manipulator
Distributed manipulation devices make use of a large number of actuators, organized in array fashion, to manipulate a small number of parts. Inspired by minimalism we look at a complementary question: can a device with few degrees of actuation freedom be used to exibly manipulate a large number of parts? In previous publications we have shown that a single horizontally-vibrating plate is just s...
متن کاملAutonomous Object Manipulation Using a Soft Planar Grasping Manipulator
This article presents the development of an autonomous motion planning algorithm for a soft planar grasping manipulator capable of grasp-and-place operations by encapsulation with uncertainty in the position and shape of the object. The end effector of the soft manipulator is fabricated in one piece without weakening seams using lost-wax casting instead of the commonly used multilayer laminatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Institute of Control, Robotics and Systems
سال: 2010
ISSN: 1976-5622
DOI: 10.5302/j.icros.2010.16.5.456