Plane failure in rock slopes – A review on stability analysis techniques
نویسندگان
چکیده
منابع مشابه
Flexural Toppling Failure in Rock Slopes: From Theory to Applications
Toppling failure is one of the most common modes of failure of rock slopes in layered rock strata. Flexural toppling is one of the well-known modes of the failure. This type of failure occurs due to bending stress. In this article, a brief yet comprehensive review of toppling failure is presented. Firstly, the conditions and general mechanism of the failure are described. Then, experimental, th...
متن کاملStability of rock slopes in Valles Marineris, Mars
[1] New slope measurements from the Mars Orbiter Laser Altimeter (MOLA), in conjunction with the Rock Mass Rating system (RMR), permit inversions of slope height and angle from wallrock and interior deposits within Valles Marineris troughs for strength and lithology. Wallrock (50 < RMR < 65) is stronger than interior deposits (30 < RMR < 55). These values are consistent with layered igneous roc...
متن کاملInvestigation on the Stability of Rock Slopes Subjected to Tension Cracks via Limit Analysis
Based on the kinematic approach of limit analysis, a full set of upper bound solutions for the stability of homogeneous rock slopes subjected to tension cracks are obtained. The generalized Hoek-Brown failure criterion is employed to describe the non-linear strength envelope of rocks. In this paper, critical failure mechanisms are determined for cracks of known depth but unspecified location, c...
متن کاملflexural toppling failure in rock slopes: from theory to applications
toppling failure is one of the most common modes of failure of rock slopes in layered rock strata. flexural toppling is one of the well-known modes of the failure. this type of failure occurs due to bending stress. in this article, a brief yet comprehensive review of toppling failure is presented. firstly, the conditions and general mechanism of the failure are described. then, experimental, th...
متن کاملNumerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure
One of the most important instabilities of rock slopes is toppling failure. Among the types of toppling failure, block-flexural failures are more common instability which occurs in nature. In this failure, some rock blocks break because of tensile stresses, and some overturn under their weights, and next to all of them topple together. Physical and theoretical modeling of this failure is studie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of King Saud University - Science
سال: 2019
ISSN: 1018-3647
DOI: 10.1016/j.jksus.2017.06.004