Plasma spraying of hydroxyapatite coatings using powder, suspension and solution feedstocks

Solution and Suspension Plasma Spraying of Nanostructure Coatings

Suspension Plasma Sprayed Titanium Oxide and Hydroxyapatite Coatings

The paper aims at development of TiO2, Ca5(PO4)3OH (hydroxyapatite, HA) and their multilayer coatings onto stainless steel, titanium and aluminum substrate using suspension plasma spraying. The total thickness of the coatings was in the range 10 to 150 μm. The suspension on the base of distilled water, ethanol and their mixtures was formulated with the use of fine commercial TiO2 pigment crysta...

Plasma spraying and characterization of chromium carbide – nickel chromium coatings

Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...

Effect of Steam Treatment During Plasma Spraying on the Microstructure of Hydroxyapatite Splats and Coatings

Feasibility of Plasma Spraying in Developing MMC Coatings: Modeling the Heating of Coated Powder Particles

Coated powder particles composed of a ceramic core and a metallic coating are being considered for plasma spray applications. The goal of using these powders is to produce particulate-reinforced metal-matrix composite coatings. In this work, the feasibility of plasma spray processing in producing these composite coatings is evaluated. A numerical model is presented to analyze the in-flight ther...