Plasma spraying of wear-resistant coatings from powdered self-fluxing alloys

Plasma spraying and characterization of chromium carbide – nickel chromium coatings

Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...

Self-lubricating, low-friction, wear-resistant Al-based quasicrystalline coatings

After gas atomization, a quasicrystalline powder based on aluminium was used to prepare a thick coating by high-velocity oxygen-fuel flame torch spraying. This layer was deposited on top of a bond-coat layer on a steel plate. A post-spraying annealing treatment turned the two layers to their stable state, a γ-brass crystal and an icosahedral quasicrystal, respectively. The projection parameters...

Solution and Suspension Plasma Spraying of Nanostructure Coatings

Plasma spraying of micro-composite thermal barrier coatings

The thermal barrier coatings (TBCs) by gas tunnel-type plasma spraying exhibited ceramic-composite features consisting of a host oxide matrix ceramic with an embedded second phase material. The densities of the composite TBC were found to be higher than those sprayed with 100wt% ZrO2 or Al2O3. In the coatings produced with powder mixtures of 50wt%, the embedded splats are found to have a relati...

Btanoscale Boehmite Filler for Corrosion- and Wear-resistant Polyphenylenesulfide Coatings