Plastic anisotropy and ductile fracture of bake-hardened AA6013 aluminum sheet

Application of the GTN Model in Ductile Fracture Prediction of 7075-T651 Aluminum Alloy

In this paper the capability of Gurson-Tvergaard-Needleman (GTN) model in the prediction of ductile damage in 7075-T651 aluminum alloy is investigated. For this purpose, three types of specimens were tested: Standard tensile bars, Round notched bar (RNB) specimens and compact tension (C(T)) specimens. Standard tensile bar tests were used to obtain the mechanical properties of the material and t...

Investigation of Scaling Effects in Elastic-Plastic Ductile Fracture Using the Local Approach

This paper investigates the ability of a simple ductile local fracture model to predict the fracture initiation conditions for geometrically similar specimens of different sizes containing either sharp cracks or blunt notches. The material considered is the high strength, low hardening HY 130 steel. We simulated fracture tests on fatigue-precracked compact tension specimens and three-point bend...

Probabilistic design of aluminum sheet drawing for reduced risk of wrinkling and fracture

The exclusion of inherent process variations in the current deterministic design methods for sheet metal forming can lead to very unreliable result that may cause high scrap rate, frequent rework, machine shut down and thus huge loss of profit. In this paper, a general approach is presented to quantify the uncertainties and to incorporate them into RSM model so as to conduct probabilistic based...

Modeling of plastic anisotropy with reduced polycrystalline models. Application to aluminum alloys

Prediction of forming limit curves (FLD, MSFLD and FLSD) and necking time for SS304L sheet using finite element method and ductile fracture criteria

Forming limit curves are used as a parameter in finite element analysis to control the material's level of formability. In this research, forming limit diagram (FLD) of SS304L sheet was obtained by ABAQUSfinite element software. In practice, the experimental determination of a forming limit curve is a very time-consuming procedure which requires special and expensive equipment. Forming limit di...