Plastic Flow Joining by Shot Peening
نویسندگان
چکیده
منابع مشابه
Evaluation of Fatigue Strength Improvement by CFRP Laminates and Shot Peening onto the Tension Flanges Joining Corrugated Steel Webs
Corrugated steel web with inherent high out-of-plane stiffness has a promising application in configuring large span highway bridge girders. Due to the irregularity of the configuration details, the local stress concentration poses a major fatigue problem for the welded flange plates of high strength low alloy structural steels. In this work, the methods of applying CFRP laminate and shot peeni...
متن کاملCorrosion Properties of 34CrMo4 Steel Modified by Shot Peening
A nanocrystalline layer was prepared on the surface of 34CrMo4 steel by time controlling shot peening (SP, i.e., 1, 5, 10, and 20 minutes). Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) analysis, and transmission electron microscope (TEM) were applied to analyze the surface, cross-sections, and grain size of the specimens before and after SP. The electrochemical c...
متن کاملSurface Layer Analysis after Shot Peening by Barkhausen Noise Signal
In the paper there will be introduced method for relative determination of induced kinetic energy of hardened balls on treated surface, which was invented by J. Alemen. In our experimental work we were focused on measuring Barkhausen noise signals and comparison with microstructure, microhardness, and residual stress analysis of surface roughness. In process of shot peening there is occurrence ...
متن کاملSide Effects of Shot Peening on Fatigue Crack Initiation Life
Shot peening beneficial effects on fatigue life of mechanical components are well known. However, there are some reports in the literature that indicate inappropriate shot peening parameters tend to reduce the fatigue life. It is therefore, the purpose of this study to find a logical quantitative justification for these observations. Using finite element method, a dynamic elastic-plastic simula...
متن کاملCharacterization of Plastic Deformation Induced by Microscale Laser Shock Peening
Electron backscatter diffraction (EBSD) is used to investigate crystal lattice rotation caused by plastic deformation during high-strain rate laser shock peening in single crystal aluminum and copper sample on ~11̄0! and (001) surfaces. New experimental methodologies are employed which enable measurement of the in-plane lattice rotation under approximate plane-strain conditions. Crystal lattice ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Technology of Plasticity
سال: 2006
ISSN: 0038-1586,1882-0166
DOI: 10.9773/sosei.47.221