Plastic Strength of Beams under Combined Bending and Axial Compression (1 st Report)
نویسندگان
چکیده
منابع مشابه
Combined Plastic Bending and Compression or Tension
So far we have assumed that a plastic hinge forms if the bending moment in a critical cross section reaches the plastic limit value, M0. We have tacitly neglected the effect of the other internal forces on the formation of the yield hinge. This effect, however, can be appreciable, for example in multi-storey frames or frames with a large horizontal thrust where the axial forces are large. So, w...
متن کاملStability Analysis of Laminated Cylindrical Shells under Combined Axial Compression and Non-Uniform External Pressure
This study investigates geometrical non-linear analysis of composite circular cylindrical shells under external pressure over part of their surfaces and also shells subjected to combined axial compression and triangular external pressure. Donnell non-linear shell theory along with first order shear deformation theory (FOSD) are adopted in the analysis. In the case of combined axial compression ...
متن کاملDerivation of the Bi-axial Bending, Compression and Shear Strengths of Timber Beams
The derivation is given of the combined bi-axial bending, compression and shear strength of timber beams. As for other materials the elastic–full plastic limit design approach applies, which is known to precisely explain and predict uniaxial bending strength behaviour. The derivation is based on choosing the location of the neutral line. This provides the stress distribution in the beam cross s...
متن کاملHot Spot Stress Determination for a Tubular T-Joint under Combined Axial and Bending Loading
Finite element analysis of a tubular T-joint subjected to various loading conditions including pure axial loading, pure in-plane bending (IPB) and different ratios of axial loading to in-plane bending loading has been carried out. This effort has been established to estimate magnitudes of the peak hot spot stresses (HSS) at the brace/chord intersection and to find the corresponding locations as...
متن کاملEffect of Through Stationary Edge and Center Cracks on Static Buckling Strength of Thin Plates under Uniform Axial Compression
Thin plate structures are more widely used in many engineering applications as one of the structural members. Generally, buckling strength of thin shell structures is the ultimate load carrying capacity of these structures. The presence of cracks in a thin shell structure can considerably affect its load carrying capacity. Hence, in this work, static buckling strength of a thin square plate wit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Naval Architects of Japan
سال: 1969
ISSN: 1884-2070,0514-8499
DOI: 10.2534/jjasnaoe1968.1969.126_295