Plastic Stress Intensity Factor for a V-Shaped Notch.

A Comprehensive Model for Stiffness Coefficients in V-Shaped Cantilevers

   During past decade the AFM based nanomanipulation has been focus of attention as the promising nano fabrication approach. The main challenge in this process is the real-time monitoring. Consequently, the dynamic models have been proposed as a solution to the existing challenge. In the modeling approach the magnitudes of the forces are proportional to the stiffness coefficients o...

Local and Global Friction Factor in a Channel with V-Shaped Bottom

This paper presents an experimental research on the distribution of local friction factor, fb, and global friction factor, f, over the cross-section of a channel with V-shaped bottom, which typically occurs in sewers and culverts. Several series of experiments were conducted for measuring velocity and boundary shear stress. It is found that, Darcy-Weisbach, f, is more sensitive than other resis...

Stress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method

This article utilizes the average stress method to obtain the stress intensity factor of rotating solid and hollow disks/cylinders containing a radial crack‎. ‎It is assumed that the cracks are located radially at center‎, ‎internal or external radius of the geometry‎. ‎Results are shown for both of the plane stress and plane strain assumptions and are validated against the known data introduce...

Spatially Varied Flow Profiles in a V-Shaped Side-Channel

Resistance to Flow in a V-Shaped Bottom Channel

Water flow in open channels is always subject to the resistance to flow and energy dissipation. For design purposes, one of the needed variables is the hydraulic resistance coefficient. For this mean, the influence of cross-sectional shape together with secondary flow cells and lateral distribution of true boundary shear stress have not yet been fully explored. This paper surveys the number of ...