Platinum Investment Casting, Part I: Simulation and Experimental Study of the Casting Process
نویسندگان
چکیده
منابع مشابه
Platinum Investment Casting , Part II : Alloy
Two widely used jewellery investment casting alloys (platinum with 5 wt% ruthenium (Pt-5Ru) and platinum with 5 wt% cobalt (Pt-5Co)) suffer from poor castability and other drawbacks. In this work thermodynamic calculations of alloy properties were employed to optimise the alloy compositions. Segregation behaviour appeared to be important for the melting range. Scheil simulations were used to si...
متن کاملNumerical Simulation of the Investment Casting Process
Determining alloy shrinkage factors is very important for the investment casting process. Casting dimensions can be obtained from numerical simulations of heat transfer and deformation phenomena. The accuracy of the dimensional results depends on heat transfer results. In order to validate heat transfer models, temperature data were obtained during casting of aluminum alloy A356 in shell molds ...
متن کاملOptimization of the Investment Casting Process
Rapid prototyping is an important technique for manufacturing. This work refers to the manufacture of hollow patterns made of polymeric materials by rapid prototyping technologies for its use in the preparation of ceramic molds in the investment casting process. This work is focused on the development of a process for manufacturing patterns diff erent from those that currently exist due to its ...
متن کاملAnalytical and Experimental Study of Investment Casting with Laser Stereolithography
ANALYTICAL AND EXPERIMENTAL STUDY OF INVESTMENT CASTING WITH LASER STEREOLITHOGRAPHY MODELS by Wen-Long Yao This dissertation presents an analytical and experimental investigation of ceramic shell cracking during the burnout process in investment casting with internally webbed laser stereolithography (SLA) patterns. Included in the consideration are the cracking temperature of the ceramic shell...
متن کاملSimulation of the Stir Casting Process
Non homogeneous particle distribution is one of the greatest problems in casting Metal Matrix Composites (MMC's). To optimize some of the parameters for uniform particle distribution for batch compocasting the present simulation studies were conducted. The simulation involves visualisation experiments. In the visualisation experiments liquid and semi solid aluminium are replaced by other fluids...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Johnson Matthey Technology Review
سال: 2015
ISSN: 2056-5135
DOI: 10.1595/205651315x687399