Polarization Converting Waveguide Devices Incorporating UV-curable Reactive Mesogen
نویسندگان
چکیده
منابع مشابه
UV-curable Encapsulants for LED
UV cured epoxy systems represent complementary technology to the established heat cured epoxy systems for coating, adhesion and encapsulation of electronic devices. The UV cured epoxy systems offer significant benefits in terms of fast cure and thus very short production cycle time; low stress and better colour due to room temperature cure; process wise no mix ratio problem or anhydride handlin...
متن کاملTolerance and application of polarization independent waveguide for communication devices
A polarization independent optical waveguide structure has been developed and optimized towards minimized dependence on deviations in the processing parameters and very low processing complexity. The tolerance analysis was based on typical parameters of the silicon oxynitride technology. The optimized waveguide structure meets the criterion of a channel birefringence within 5x10 taking the proc...
متن کاملMicrofluidic Devices Made of Uv-curable Glue (noa81) for Fluorescence Detection Based Applications
The UV-curable adhesive NOA81 (Norland Optical Adhesive) is a promising liquid photopolymer for low-cost microfluidic chip production. Different fabrication methods for NOA81 are suggested [1,2]. However, optical characterization for fluorescent based detection systems is missing. We present a comparison of fluorescent emission spectra of various NOA types as well as the time evolution of the s...
متن کاملRheological Studies of UV - curable Materials
The challenge for studying fast changing systems with rheology such as UV initiated polymerization and crosslinking is multifold. These materials react within seconds and the moduli change over 2 to 3 decades. UV light must irradiate the sample homogeneously over a short time period and fast data acquisition is required to capture the modulus change during the reaction. An option for UV curing,...
متن کاملCan-Printing Process Uses UV-Curable Coating
Approximately 100 billion aluminum cans are produced annually, mainly for the beverage industry. Early technologies for decorating the cans often used solvent-based coatings containing solvents at concentrations of -70% to 75% by volume (Randall 1992). The solvent composition was typically a mixture of aliphatic hydrocarbons, aromatics, ethers, cellosolves, and acetates. Unfortunately, this met...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Optical Society of Korea
سال: 2011
ISSN: 1226-4776
DOI: 10.3807/josk.2011.15.3.289