Polyamino Acid Fibers and Chitin Fibers

Gum Tragacanth Fibers Introducing Primitive GT Fibers (RESEARCH NOTE)

In this research, a method for producing gum tragacanth (GT) fibers is presented. Ribbon type GT of Astragalus Gummifer species were obtained from local production lands. The gum was treated with alkali to increase its process ability, and allowed to stand for a period of time to reach the proper viscosity and/or to "ripen". Samples with different ripening times were prepared and their viscosit...

FABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS

Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...

A Study on the Kinetic and Thermodynamic Parameters of Different Acid Dyes on Nylon 6 Fibers

Eco-Friendly Hybrid Concrete using Pozzolanic Binder and Glass Fibers

Hybrid Concrete focused on the development of buildings, highways, and other structures of civil engineering. In the current study, various mix combinations have been prepared and tested with different percentages of super-plasticizer at different levels of water reduction for obtaining the optimum mix. Further, study on different properties of hybrid concrete and replacement of ordinary portla...

Strength and Toughness of Reinforced Concrete with Coated Steel Fibers

The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....