Polylactic acid macromonomer radical propagation kinetics and degradation behaviour
نویسندگان
چکیده
منابع مشابه
The Degradation of Polylactic Acid Aiber
Polylactic acid (PLA) fiber, also known as corn fiber, is made of corn and other grains through fermentation, polymerization and spinning. Thus it is biodegradable and environmentally friendly. Three kinds of buffer solutions with PH values of 4, 7.2 and 11 were made for the investigation of the degradation properties of PLA. The experimental results showed that the degradation of polylactic ac...
متن کاملPolylactic acid (PLA)
This website provides an excellent overview of PLA as a polymer, its properties, and manufacture. This web article describes the production of lactic acid from biomass by microbial fermentation coupled to a poly-merization process to make PLA. The article is a bit dated and its industrial projections are now seen to be a bit over-optimistic. NatureWorks is the company that started large-scale p...
متن کاملPreparation of Perovskite Nanocomposites and Photochemical Degradation Kinetics of Acid Yellow 199
In this study PbZrO3 was prepared as a matrix by the sol-gel process and is characterized by XRD and SEM techniques. The particle size of the synthesized nanocomposite is evaluated about 43 nm. The Lead Zirconate is then doped with Ce3+/TiO2 in different ratios. Nanocomposites are added in the reaction in a photoreactor with a pollutant (an Azo dye) and as a result the degradation percentage is...
متن کاملMWCNTs-Reinforced Epoxidized Linseed Oil Plasticized Polylactic Acid Nanocomposite and Its Electroactive Shape Memory Behaviour
A novel electroactive shape memory polymer nanocomposite of epoxidized linseed oil plasticized polylactic acid and multi-walled carbon nanotubes (MWCNTs) was prepared by a combination of solution blending, solvent cast technique, and hydraulic hot press moulding. In this study, polylactic acid (PLA) was first plasticized by epoxidized linseed oil (ELO) in order to overcome the major limitations...
متن کاملRheological Techniques for Determining Degradation of Polylactic Acid in Bioresorbable Medical Polymer Systems
A method developed in the 1980s for the conversion of linear rheological data to molar mass distribution is revisited in the context of degradable polymers. The method is first applied using linear rheology for a linear polystyrene, for which all conversion parameters are known. A proof of principle is then carried out on four polycarbonate grades. Finally, preliminary results are shown on degr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Reaction Chemistry & Engineering
سال: 2017
ISSN: 2058-9883
DOI: 10.1039/c7re00019g