Polymer/Alumina Nanofiber Composite Sheets with Anisotropic High Thermal Conductivity
نویسندگان
چکیده
منابع مشابه
High conductivity perfluorosulfonic acid nanofiber composite fuel-cell membranes.
There is a need for polymeric hydrogen/air fuel-cell membranes that can efficiently conduct protons at moderate to high temperatures for wet and dry gas feeds. The US Department of Energy (DOE), for example, set an exceedingly stringent preliminary target for membrane conductivity, 0.10 Scm 1 at 120 8C and 50% relative humidity (RH). Herein, we describe the fabrication and basic properties of o...
متن کاملThermal Contact Resistance and Thermal Conductivity of a Carbon Nanofiber
We have measured the thermal resistance of a 152-nm-diameter carbon nanofiber before and after a platinum layer was deposited on the contacts between the nanofiber and the measurement device. The contact resistance was reduced by the platinum coating for about 9–13% of the total thermal resistance of the nanofiber sample before the platinum coating. At a temperature of 300 K, the axial thermal ...
متن کاملTunneling conductivity in anisotropic nanofiber composites: a percolation-based model.
The critical path approximation ('CPA') is integrated with a lattice-based approach to percolation to provide a model for conductivity in nanofiber-based composites. Our treatment incorporates a recent estimate for the anisotropy in tunneling-based conductance as a function of the relative angle between the axes of elongated nanoparticles. The conductivity is examined as a function of the volum...
متن کاملOriented MOF-polymer Composite Nanofiber Membranes for High Proton Conductivity at High Temperature and Anhydrous Condition
The novel oriented electrospun nanofiber membrane composed of MOFs and SPPESK has been synthesized for proton exchange membrane fuel cell operating at high temperature and anhydrous conditions. It is clear that the oriented nanofiber membrane displays the higher proton conductivity than that of the disordered nanofiber membrane or the membrane prepared by conventional solvent-casting method (wi...
متن کاملHierarchically constructed metal foam/polymer composite for high thermal conductivity
Most polymeric tribological components are inherently insulative, resulting in susceptibility to failure from frictional heating at the PV limit, which is typically reported as a product of the heat flux terms pressure (P) and sliding speed (V). This letter reports on the design of a tribological composite for increased thermal conductivity and PV limit. The control sample is an unfilled compos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Textile Engineering
سال: 2019
ISSN: 1346-8235,1880-1986
DOI: 10.4188/jte.65.67