Polymeric particle composites with filler saturated matrix
نویسندگان
چکیده
منابع مشابه
Frequency Variation of Complex Permeability in Dual Ferrite Filler — Single Polymeric Matrix Composites
The frequency dependences of complex initial permeability for triplecomponent composite materials based on two different types of ferrite filler (MnZn and NiZn ferrite) and a nonmagnetic polymeric matrix (PVC) were studied in the frequency range of 10 kHz–1 GHz. The frequency dispersion of permeability is discussed by means of a dynamic model based on the superposition of the two types of magne...
متن کاملPivotal role of filler/matrix interface in dental composites: Review
Dental material research has improved the application and performance of the polymer-based restorative dental composite materials. In spite of these advances, some deficiencies exist in their
متن کاملAbrasive Wear in Three-phase Waste-based Polymeric Particle Composites
Original scientific paper The experiment centres on two and three body abrasion in three-phase waste-based composite systems. The composite systems abrasion resistance is defined not only by the physical-mechanical relationships of the separate phases of the composite, but also by the mutual interaction of the phases and on the matrix-filler interface. To describe the composite system abrasion ...
متن کاملIonically Bonded Filler-Elastomer Composites*
Tertiary amine-modified corn starches were converted to their basic or hydroxide form and combined with carboxylated butadiene-acrylonitrile copolymer and butadiene-styrene-sulfonic acid polymer to produce ionically bonded filler-elastomer composites. An increasing percentage of the elastomer fraction in the starch-elastomer composite is insolubilized as the starch-to-elastomer ratio increases....
متن کاملMechanical energy dissipation using carbon fiber polymer–matrix structural composites with filler incorporation
Continuous carbon fiber composites with enhanced mechanical energy dissipation (vibration damping) under flexure are provided by incorporation of fillers between the laminae. Exfoliated graphite (EG) as a sole filler is more effective than carbon nanotube (SWCNT/ MWCNT), halloysite nanotube (HNT), or nanoclay as sole fillers in enhancing the loss tangent, if the curing pressure is 2.0 (not 0.5)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Technology
سال: 2012
ISSN: 1213-2489,1213-2489
DOI: 10.21062/ujep/x.2012/a/1213-2489/mt/12/2/272