Polyphosphoric acid proton conductors and their application to fuel cell electrolytes.
نویسندگان
چکیده
منابع مشابه
Solid acid proton conductors: from laboratory curiosities to fuel cell electrolytes.
The compound CsH2PO4 has emerged as a viable electrolyte for intermediate temperature (200-300 degrees C) fuel cells. In order to settle the question of the high temperature behavior of this material, conductivity measurements were performed by two-point AC impedance spectroscopy under humidified conditions (p[H2O] = 0.4 atm). A transition to a stable, high conductivity phase was observed at 23...
متن کاملTriazole-based Electrolytes for Fuel Cell Applications: Material Properties and Proton Transfer Capabilities
4,5-Dicyano-1H-[1,2,3]-Triazole (DCTz) exhibits a very low proton affinity. This makes it a possible water replacement for proton transport in high temperature polymer electrolyte membranes. A detailed investigation is carried out to define various physical properties as well as the proton transfer characteristics of DCTz. Thermogravimetric analysis showed that DCTz as well as DCTz salts are th...
متن کاملDynamic investigation of hydrocarbon proton exchange membrane Fuel Cell
Sulfonated polyether ether ketone (SPEEK) is categorized in a nonfluorinated aromatic hydrocarbon proton exchange membrane (PEM) group and considered as a suitable substitute for common per-fluorinated membranes, such as Nafion, due to wider operating temperature, less feed gas crossover, and lower cost. Since modeling results in a better understanding of a phenomenon, in this study a dynamic o...
متن کاملMesoscale modeling of hydrated morphologies of 3M perfluorosulfonic acid-based fuel cell electrolytes.
Dissipative particle dynamics (DPD) simulations have been carried out to study the hydrated morphology of 3M perfluorosulfonic acid (PFSA) fuel cell membranes as a function of the equivalent weight (EW), molecular weight (MW), and hydration level. The 3M PFSA ionomers were modeled using typical EWs of 578, 640, and 790 g/mol, and molecular weights were varied from about 45,000 to 90,000 g/mol i...
متن کاملImproved solid oxide fuel cell performance with nanostructured electrolytes.
Considerable attention has been focused on solid oxide fuel cells (SOFCs) due to their potential for providing clean and reliable electric power. However, the high operating temperatures of current SOFCs limit their adoption in mobile applications. To lower the SOFC operating temperature, we fabricated a corrugated thin-film electrolyte membrane by nanosphere lithography and atomic layer deposi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON KAGAKU KAISHI
سال: 1988
ISSN: 2185-0925,0369-4577
DOI: 10.1246/nikkashi.1988.1375