Polypropylene/Polyamide Elastomer Blends: Morphology and Mechanical Property
نویسندگان
چکیده
منابع مشابه
Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC
In this study, eight binary blends of polypropylene (PP)/ poly [styrene-b-(ethylene-co butylene)-b-styrene] tri-block copolymer (SEBS) and polypropylene (PP)/ polycarbonate (PC) were produced at different composition through twin screw extruder. The composition of the minor phases was changed to correlate the morphology and mechanical properties of binary blends (PP/PC and PP/SEBS) through ther...
متن کاملEffective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends
In this work, ternary polymer blends based on polypropylene (PP)/ polyethylene terephthalate (PET) /poly(styrene-b (ethylene-co-butylene)-b-styrene) (SEBS) triblock copolymer and a reactive maleic anhydride grafted SEBS (SEBS-g-MAH) at various compositions were prepared by co-rotating twin screw extruder. The effects of PET, SEBS and SEBS-g-MAH compatibilizer on morphology of the blends were ex...
متن کاملeffective parameters on the phase morphology and mechanical properties of pp/pet/sebs ternary polymer blends
in this work, ternary polymer blends based on polypropylene (pp)/ polyethylene terephthalate (pet) /poly(styrene-b (ethylene-co-butylene)-b-styrene) (sebs) triblock copolymer and a reactive maleic anhydride grafted sebs (sebs-g-mah) at various compositions were prepared by co-rotating twin screw extruder. the effects of pet, sebs and sebs-g-mah compatibilizer on morphology of the blends were ex...
متن کاملMorphology and Mechanical Properties of Binary Blends of Polypropylene with Statistical and Block Ethylene-Octene Copolymers
In the present work, statistical (EOCs) and block (OBCs) ethylene-octene copolymers, with similar densities and crystallinities, were used as impact modifiers of isotactic polypropylene (iPP), and the toughening effects of these two types of elastomers were compared. The viscosity curves of EOCs were similar to those of OBCs with equivalent melt flow rate (MFR), enabling a comparison of the vis...
متن کاملMelt-based compression-molded scaffolds from chitosan-polyester blends and composites: Morphology and mechanical properties.
Blends of chitosan and synthetic aliphatic polyesters (polybutylene succinate, polybutylene succinate adipate, polycaprolactone, and polybutylene terepthalate adipate) were compounded with and without hydroxyapatite, a bioactive mineral filler known to enhance osteoconduction. The blends and composites were compression molded with two different granulometric salt sizes (63-125 microm and 250-50...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Korea
سال: 2014
ISSN: 0379-153X
DOI: 10.7317/pk.2014.38.5.613