Porous Silicon Based High Efficiency Photoelectrodes
نویسندگان
چکیده
منابع مشابه
High Sensitivity Sensor Based on Porous Silicon Waveguide
Porous silicon (PSi) waveguides are fabricated as a new platform for high sensitivity biosensors. Biomolecules infiltrated into the PSi waveguide increase the effective refractive index of the waveguide and change the angle at which incident light couples into a waveguide mode. Due to the high surface area to volume ratio of PSi and the confinement of optical energy in the region where the biom...
متن کاملPorous silicon-based rugate filters.
We report an experimental study of porous silicon-based rugate filters. We performed filter apodization, following a half-apodization approach, which successfully attenuated the sidelobes at both sides of the photonic stop band. We achieved successful reduction of interference ripples through the insertion of index-matching layers on the first and last interfaces. An apodized dielectric mirror ...
متن کاملPhotosensitive porous silicon based structures
We present results of electrical and photoelectrical measurements on two types of Al/porous silicon (PS)/monocrystalline silicon (c-Si)/Al sandwich structures with thin and thick PS layers obtained by stain etching. Current-voltage characteristics and photosensitivity spectra indicate that for structures with a thin PS layer the photosensitivity is determined by PS/c-Si heterojunctions (HJ), wh...
متن کاملSilicon diatom frustules as nanostructured photoelectrodes.
In the quest for solutions to meeting future energy demands, solar fuels play an important role. A particularly promising example is photocatalysis since even incremental improvements in performance in this process are bound to translate into significant cost benefits. Here, we report that semiconducting and high surface area 3D silicon replicas prepared from abundantly available diatom fossils...
متن کاملHigh-Columbic-Efficiency Lithium Battery Based on Silicon Particle Materials
Micro-sized polycrystalline silicon particles were used as anode materials of lithium-ion battery. The columbic efficiency of the first cycle reached a relatively high value of 91.8 % after prelithiation and increased to 99 % in the second cycle. Furthermore, columbic efficiency remained above 99 % for up to 280+ cycles. The excellent performances of the batteries were the results of the use of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya Vysshikh Uchebnykh Zavedenii. Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering
سال: 2014
ISSN: 2413-6387,1609-3577
DOI: 10.17073/1609-3577-2014-4-268-277