Position estimation of RFID-based sensors using SAW compressive receivers
نویسندگان
چکیده
منابع مشابه
Compressive strain measurement using RFID patch antenna sensors
In this research, two radiofrequency identification (RFID) antenna sensor designs are tested for compressive strain measurement. The first design is a passive (battery-free) folded patch antenna sensor with a planar dimension of 61mm × 69mm. The second design is a slotted patch antenna sensor, whose dimension is reduced to 48mm × 44mm by introducing slots on antenna conducting layer to detour s...
متن کاملUsing Inertial Sensors for Position and Orientation Estimation
In recent years, microelectromechanical system (MEMS) inertial sensors (3D accelerometers and 3D gyroscopes) have become widely available due to their small size and low cost. Inertial sensor measurements are obtained at high sampling rates and can be integrated to obtain position and orientation information. These estimates are accurate on a short time scale, but suffer from integration drift ...
متن کاملEnvironmental and performance analysis of SAW-based RFID systems
This paper describes the environmental effects and performance analysis of 2.45 GHz Surface Acoustic Wave (SAW) based RFID systems. Piezoelectric materials and their underlying principles are reviewed to describe the nature of SAWs. A performance analysis is conducted to measure the readability and read range for individual tags, compared to multiple tags in a field environment. On the other ha...
متن کاملBottom-up estimation of joint moments during manual lifting using orientation sensors instead of position sensors.
L5/S1, hip and knee moments during manual lifting tasks are, in a laboratory environment, frequently established by bottom-up inverse dynamics, using force plates to measure ground reaction forces (GRFs) and an optoelectronic system to measure segment positions and orientations. For field measurements, alternative measurement systems are being developed. One alternative is the use of small body...
متن کاملDesign and Implementation of 2.45 GHz Passive SAW Temperature Sensors with BPSK Coded RFID Configuration
A surface acoustic wave based passive temperature sensor capable of multiple access is investigated. Binary Phase Shift Keying (BPSK) codes of eight chips were implemented using a reflective delay line scheme on a Y-Z LiNbO₃ piezoelectric substrate. An accurate simulation based on the combined finite- and boundary element method (FEM/BEM) was performed in order to determine the optimum design p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors and Actuators A: Physical
سال: 2016
ISSN: 0924-4247
DOI: 10.1016/j.sna.2016.04.032