Post-fire residual mechanical properties of steel butt weld — Experimental study
نویسندگان
چکیده
منابع مشابه
finite element modeling and experimental study of residual stresses in repair butt weld of st-37 plates
welding is one of the most important assembling methods which are widely applied in different applications. in service conditions, some of the weld joints which meet defects must be repaired. the residual stresses impress the operation and efficiency of the repair weldment. in this study, the temperature and the residual stress fields were investigated by both the finite element simulation and ...
متن کاملResidual stress evaluation in butt-welded steel plates
Faculty of Mechanical Engineering, Sardar Raja College of Engineering, Alangulam, Tirunelveli 627 808, India Faculty of Mechanical Engineering, Government College of Engineering, Tirunelveli 627 007, India Faculty of Mechanical Engineering, Alagappa Chettiar College of Engineering and Technology, Karaikudi 630 002, India Structural Analysis and Testing Group, Vikram Sarabhai Space Centre, Triva...
متن کاملExperimental Study of the Residual Stresses in Girth Weld of Natural Gas Transmission Pipeline
In order to achieve integrated condition in the girth welding of high pressure natural gas transmission pipelines, the weld zones and its surrounding area should have good mechanical properties. Residual stresses are an important defect especially in the girth welding of the pipeline. In this study, two API X70 steel pipes (with spiral seam weld) of 56 inches outside diameter and 0.780 inch wal...
متن کاملStainless steel weld metal designed to mitigate residual stresses
There have been considerable efforts to create welding consumables which on solid state phase transformation partly compensate for the stresses which develop when a constrained weld cools to ambient temperatures. All of these efforts have focused on structural steels which are ferritic. In the present work, alloy design methods have been used to create a stainless steel welding consumable which...
متن کاملI / RESIDUAL STRESS DISTRIBUTION IN FeAl WELD OVERLAY ON STEEL
Neutron diffraction was used to measure the residual stress distribution in an FeAl weld overlay on steel. It was found that the residual stresses accumulated during welding were essentially removed by the post-weld heat treatment that was applied to the specimen; most residual stresses in the specimen developed during cooling following the post-weld heat treatment. The experimental data were c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Constructional Steel Research
سال: 2017
ISSN: 0143-974X
DOI: 10.1016/j.jcsr.2016.11.004