PRECAST REINFORCED CONCRETE COLUMN USING LAP SPRICES
نویسندگان
چکیده
منابع مشابه
Nonlinear Damping Identification in Precast Prestressed Reinforced Concrete Beams
This article presents a damage detection method for prestressed reinforced concrete (PRC) elements based on free vibration tests and nonlinear damping identification. Integrated static and dynamic experiments were carried out on three precast PRC beam specimens. The static loading induced different levels of damage to the beams. At each damage level, impulsive loading was applied to the beams a...
متن کاملFragility Curves for Reinforced Concrete Frames with Lap-Spliced Columns
Placing column lap-splice in the locations of possible nonlinear deformation may adversely affect the structures response to strong ground motions. Localization of damage in splice zone may change the structural response and prevent the load redistribution and development of a uniform pattern of nonlinear excursions among the various members. Validated by existing laboratory experiments, this s...
متن کاملPrecast Concrete Elements
Lattice-girder floor slabs and double-wall elements have been successfully used in building and industrial construction for decades. These precast elements of 50 – 70 mm thickness serve as permanent formwork for the subsequently added in-situ concrete creating a monolithic structure. The high prefabrication level allows the construction period to be significantly minimized. The main goal is the...
متن کاملFinite Element Analysis of Reinforced Concrete Column Under Lateral Load
To serve its purpose a structure must be safe against collapse and serviceable in use. Serviceability requires that deflections be adequately small to keep the cracks within tolerable limits. Although the widely followed ACI Code suggests a detailed method of deflection calculation, it often cannot exactly perceive the actual behavior of a structure. For this purpose, finite element analysis, u...
متن کاملPerformance of the Modified Precast Beam to Column Connection Placed on a Concrete Corbel
Precast concrete structures in Iran are generally designed as continuous columns with hinged beams, thereby making them simple frames. In this system in site show walls in two directions of buildings guaranteed lateral resisting system. However, in order to obtain a seismic resisting frame, the connection between beam and column should be moment resisting and ductile, allowing the formation of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 1995
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.60.139_3