Predicting Behavior of Corrosion Resistant Alloys By Potentiostatic Polarization Methods
نویسندگان
چکیده
منابع مشابه
Galvanic Corrosion Behavior of Dental Alloys
There is a wide variety of dental alloys, ranging from nearly pure gold and conventional gold-based alloys to alloys based on silver, palladium, nickel, cobalt, iron, titanium, tin, and other metals (Table 1). The types of dental alloys have increased significantly since 1980s in order to change the market price of gold and palladium. Although gold alloys are the mate‐ rials of choice in this a...
متن کاملHigh-temperature Corrosion Behavior of Iron Aluminide Alloys and Coatings
A multi-year effort has been focused on optimizing the long-term oxidation performance of ingot-processed (IP) and oxide-dispersion strengthened (ODS) Fe3Al and iron aluminidebased coatings. Based on results from several composition iterations, a Hf-doped alloy (Fe28Al-2Cr-0.05at.%Hf) has been developed with significantly better high temperature oxidation resistance than other iron aluminides. ...
متن کاملCorrosion Behavior of NiTiCo High Stiffness Shape Memory Alloys
The corrosion behavior of high stiffness NiTiCo shape memory alloys was systematically investigated in the present study including straight wires, wire formed stents, and laser cut stents. It was found that the corrosion behavior of NiTiCo alloys is comparable to that of binary NiTi. This is attributed to the small amount of cobalt used in the ternary alloy. Additionally, the corrosion resistan...
متن کاملCorrosion Behavior of Solution- Annealed CoCrMo Medical Implant Alloys
Corrosion behavior of solution annealed high-carbon and low-carbon CoCrMo wrought alloy, commonly used in medical joint implants, was investigated. The surface passivation properties remained similar with and without the various solution anneal conditions, while the rate of corrosion was lower for solution annealed high-carbon CoCrMo. Corrosion was found to target phase boundaries and certain g...
متن کاملCorrosion behavior of metals and alloys in marine-industrial environment.
This work deals with atmospheric corrosion to assess the degrading effects of air pollutants on ferrous and non-ferrous metals and alloys, which are mostly used as engineering materials. An exposure study was conducted in the Tuticorin port area located on the east coast of South India, in the Gulf of Mannar with Sri Lanka to the southeast. Common engineering materials, namely mild steel, galva...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING DIGEST
سال: 1963
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1954.12.5_241