Prediction of elastic-plastic fatigue crack growth rate and crack closure under varying loadings.
نویسندگان
چکیده
منابع مشابه
On Crack Closure and Crack Tip Shielding during Fatigue Crack Growth
Fatigue crack growth can be strongly influenced by crack closure, i. e., the contacting of the opposing faces of a fatigue crack above the minimum load in a loading cycle. This crack closure shields the crack tip from the full stress field, but different views are held regarding the extent of this shielding. The type of closure, whether it be plasticity-induced, or roughness-induced may also pl...
متن کاملAnalyses of Fatigue Crack Growth and Closure Near Threshold Conditions for Large-Crack Behavior
A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-Kmax threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on contact-K analyses and the other on contact crack-openingdisplacement (COD) analyses. These methods gave nearly identica...
متن کاملContinuing Crack-tip Deformation and Fracture for Plane-strain Crack Growth in Elastic-plastic Solids
ANALYSIS of the deformation field consistent with a Prandtl stress distribution travelling with an advancing plane-strain crack reveals the functional form of the near tip crack profile in an elastic-plastic solid. The crack opening 6 is shown to have the form 6 N r In (const./r) at a distance r from the tip. This observation coupled with data generated from finite element investigations of gro...
متن کاملThe Elastic-plastic Mechanics of Crack Extension
This paper briefly reviews progres~ in the elastic plastic analysis of crack extension. Analytical results for plane strain and plane stress deformation fields are noted, and elastic-plastic fracture instability as well as transitional behavior and combined rate and thermal effects are discussed.
متن کاملPrediction of fatigue crack growth under constant amplitude loading and a single overload based on elasto-plastic crack tip stresses and strains
It is generally accepted that the fatigue crack growth (FCG) depends mainly on the stress intensity factor range (DK) and the maximum stress intensity factor (Kmax). The two parameters are usually combined into one expression called often as the driving force and many various driving forces have been proposed up to date. The driving force can be successful as long as the stress intensity factor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1988
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.37.928