Preform fabrication and fiber drawing of 300 nm broadband Cr-doped fibers
نویسندگان
چکیده
منابع مشابه
Evolution of photo-induced defects in Ge-doped fiber/preform: influence of the drawing.
We have studied the generation mechanisms of two different radiation-induced point defects, the Ge(1) and Ge(2) centers, in a germanosilicate fiber and in its original preform. The samples have been investigated before and after X-ray irradiation using the confocal microscopy luminescence and the electron paramagnetic resonance techniques. Our experimental results show the higher radiation sens...
متن کاملOptical spectroscopy of bismuth-doped pure silica fiber preform.
We report on the optical spectroscopy of monolithic fiber preform prepared from nanoporous bismuth-doped silica glass. The experiments reveal the existence of at least two different types of active centers and clearly demonstrate that the presence in the glass matrix of other dopant is not necessary to obtain the near-IR photoluminescence connected to Bismuth.
متن کاملFabrication of corrugated Ge-doped silica fibers.
We present a method of fabricating Ge-doped SiO2 fibers with corrugations around their full circumference for a desired length in the longitudinal direction. The procedure comprises three steps: hydrogenation of Ge-doped SiO2 fibers to increase photosensitivity, recording of Bragg gratings with ultraviolet light to achieve modulation of refractive index, and chemical etching. Finite-length, rad...
متن کاملA broadband Ytterbium-doped tunable fiber laser for 3He optical pumping at 1083 nm
Large amounts of hyperpolarized He gas with high nuclear polarization rates are required for use in neutron spin filters or nuclear magnetic resonance imaging of human lung. Very high efficiency can be obtained by metastability exchange optical pumping using multimode lasers to excite the 2S-2P transition at 1083 nm. Broadband Ytterbium-doped tunable fiber lasers have been designed for that par...
متن کاملWide wavelength selectable all-fiber thulium doped fiber laser between 1925 nm and 2200 nm.
We demonstrate an all-fiber Tm(3+)-doped silica fiber laser operating at a wide selectable wavelength range by using different fiber Bragg gratings (FBGs) as wavelength selection elements. With a specifically designed high reflective (HR) FBG and the fiber end as an output coupler, the lasing in the range from 1975 nm to 2150 nm with slope efficiency of >30% can be achieved. By employing a low ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2007
ISSN: 1094-4087
DOI: 10.1364/oe.15.014382